Solar PV ribbon production equipment

Busbar ribbon and round-wire lines for solar manufacturing.

Choose by finished copper profile. A specialist machine builder manufactures the line. SOLARGY reviews your ribbon dimensions, coating alloy and output target with the builder, then coordinates your quotation and export arrangements.

3-8 mm busbar ribbon width 0.15-0.40 mm coated round-wire diameter Export support layout, utilities, and commissioning
BHLD-04 solar PV busbar ribbon production line layout
BHLD-04 reference line layout. Final footprint and configuration are confirmed for the ordered project.

Choose by finished product

Two lines, two distinct process routes.

Choose BHLD-04 for flat rolled busbar ribbon or RWRM-AT for coated round wire. Compare finished dimensions and actual running speeds below.

Flat busbar ribbon

BHLD-04

Drawing and four-stand flat rolling, with optional reflection rolling, annealing, flux, coating, and spool or pancake take-up.

Finished width
3-8 mm
Finished thickness
0.20-0.40 mm
Stated actual speed
80-120 m/min
Design speed
150 m/min
Review BHLD-04
Coated round wire

RWRM-AT

Two wire paths with integrated drawing, induction annealing, flux, tin coating, online measurement, and automatic spool change.

Finished diameter
0.15-0.40 mm
Wire paths
2 in one machine
Stated actual maximum
300-350 m/min*
Design speed
400 m/min

*Actual maximum stated for plant temperature at or below 25°C.

Review RWRM-AT

Model BHLD-04

Busbar Ribbon Production Line

For flat solar busbar ribbon made from TU1 copper input. The reference line combines wire drawing, precision flat rolling, tension control, annealing, hot-dip coating, measurement, and take-up in one process route.

Complete BHLD-04 busbar ribbon line arrangement
Basket pay-off 9-die drawing 4-stand flat rolling Annealing + inert gas Flux treatment Hot-dip coating Cooling + measurement Spool or pancake take-up
BHLD-04 four-stand flat rolling section

Four rolling stands with online control. The reference system uses five pneumatic tension units and five laser gauges.

Reference technical data

Input copper
TU1, diameter 2.6-3.0 mm
Finished ribbon
Width 3-8 mm; thickness 0.20-0.40 mm
Actual / design speed
80-120 m/min / 150 m/min
Stated capacity
60-80 tonnes/month; operating schedule to confirm
Width / thickness tolerance
±0.085 mm / ±0.01 mm
Coating per side
0.010-0.025 mm
Elongation
≥25%
Tensile / yield
≥260 MPa / 90-130 MPa
Camber
≤5 mm/m
Take-up
Spool 25 kg, max. 30 kg; pancake 1-2 kg
Reference electrical
415 V / 50 Hz, configurable
Approx. line data
100 kW installed, 68 kW running; 26 x 3 m; 14 t

Final layout, weight, power, controls, utilities, output, and acceptance criteria require order confirmation.

Model RWRM-AT

Round Wire Production Line

A two-path integrated line for fine coated round wire, combining multi-die drawing, induction annealing, controlled cooling, flux, tin coating, online measurement, automatic alloy feeding, and automatic spool change.

Wire pay-off Up to 24 drawing dies Induction annealing Inert gas + cooling Flux treatment Tin coating Online gauges Automatic spool change

Reference technical data

Wire paths
2 in one machine
Recommended raw copper
Oxygen-free copper, 99.99%
Input bare wire
0.8-1.2 mm
Finished coated wire
0.15-0.40 mm
Actual / design speed
300-350 m/min* / 400 m/min
Coating per side
0.010-0.020 mm
Bare copper tolerance
±0.003 mm, subject to raw material quality
Coating tolerance
±0.005 mm
Elongation
25-30%
Yield / tensile
≤65 MPa / <240 MPa
Camber
≤5 mm/m
Reference electrical
415 V / 50 Hz, configurable

*Stated actual maximum requires plant temperature at or below 25°C. Final power, layout, weight, alloy, packing, speed, and acceptance criteria require order confirmation.

Before quotation

Six decisions that define the right line.

Send known values first. Unknown items can be marked for recommendation instead of delaying the first technical discussion.

01

Finished product

Ribbon width and thickness or round-wire diameter, plus tolerances.

02

Coating alloy

Leaded or lead-free alloy requirement and coating thickness.

03

Output target

Required monthly output, operating hours, and preferred line speed.

04

Material and packing

Raw copper specification, feed format, and spool or pancake output.

05

Line options

Busbar reflection or traction options, or round-wire pay-off arrangement.

06

Factory utilities

Voltage, floor space, cooling water, inert gas, compressed air, and ventilation.

Technical buyer questions

PV ribbon line FAQ.

What information is needed to configure a PV ribbon production line?

Confirm the finished size and tolerance, coating alloy, output target, raw copper, packing format, voltage, floor space, and required utilities.

What is the operating speed of the RWRM-AT?

The stated actual maximum is 300-350 m/min when plant temperature is at or below 25°C. Design speed is 400 m/min. Final performance depends on the confirmed project conditions.

Can the electrical system be configured for export?

Yes. The reference is 415 V / 50 Hz. Final voltage, components, diagrams, manuals, layout, utilities, and commissioning scope are confirmed per order.

Can SOLARGY support installation and ramp-up?

SOLARGY can coordinate export delivery, English documentation, remote technical communication, training guidance, spare parts, and commissioning scope for the project.

Request a technical proposal

Start with the finished ribbon you need to produce.

We will match the process route, line configuration, utility requirements, output basis, footprint, delivery scope, and commercial quotation to your project data.

WhatsApp:+86 1351 100 8242 Email: [email protected] Website: solargyautomation.com

Submissions are sent to [email protected]. Final specifications are confirmed in the technical agreement.